Express Programming After Motor Replacement
WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Window regulator motor programming must be performed after a window regulator motor has been replaced. When the reprogramming procedure has been completed, the PWR WNDW circuit breaker must be removed for at least 30 seconds.
When a window regulator motor is disconnected from battery voltage, it must be reprogrammed in order for the express-UP or express-DOWN feature to operate properly. Keep in mind, that if something is obstructing the window from opening or closing and you continue programming, the window will only express-UP or express-DOWN to the spot where the obstruction occurred. If an obstruction comes in contact with the window during the programming procedure, the procedure will have to be repeated.