LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LS, FWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Strut, Strut Component, and Spring Replacement >> Assembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Procedure

  1. Install the coil spring and upper strut mount to the J 45400  .
    2. Fig 1: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
  3. Install the strut to the coil spring and upper strut mount.
  4. Loosely install the strut retaining nut.
    5. CAUTION: Refer to Fastener Caution .
  5. Use a 45 TORX® socket in order to hold the strut shaft. Use the J 42991  to install the upper strut mount nut.

    Tighten:  Tighten the strut mount nut to 85 N.m (63 lb ft).

  6. Remove the strut from the J 45400  .
  7. Install the strut to the vehicle. Refer to Strut Assembly Replacement .
scientia non olet · About LEMON Manuals