LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Passenger Presence System Programming and Setup >> Passenger Presence System Preload System Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger Presence System Preload System Test

  1. Empty the front outboard passenger seat (this system is susceptible to conductive material).
  2. With the scan tool, perform the Preload Passenger Presence System procedure.
  3. Using the scan tool, check for DTC B0081 in history. If the test fails or DTC B0081 11 is current, confirm that there is no conductive material on the seat. If the test fails again, for heated seats, ensure that the sensor pad is on top of the heater element. Once the test successfully completes, cycle the ignition OFF.
  4. Perform the Diagnostic System Check - Vehicle after successfully completing the preload test procedure to ensure the system is functioning properly.
scientia non olet · About LEMON Manuals