Inspection/Maintenance System DTC Table

System	DTCs Required to Set System Status to YES
If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance System Check , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included within the conditions are additional DTCs, which if set, may inhibit the DTCs listed below from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES.
Camshaft System	DTC P000A-P000D, P0011, P0014, P0021, or P0024 (Without LF1)
Catalyst	DTC P0420 or P0430
EVAP	DTC P0442 DTC P0446 DTC P0450 or P0451 DTC P0455 or P0497 DTC P0496
Oxygen Sensor	DTC P013A, P013C, P013E, or P014A (LLT) DTC P0133 or P0153 (with LLT) DTC P0137, P0138, P0140, P0157, P0158, or P0160 (With LLT) DTC P2270 or P2272 (w/LLT) DTC P2271 or P2273 (w/LLT)
Oxygen Sensor Heater	DTC P0135, P0141, P0155, or P0161