Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Module Bucket

Courtesy of GENERAL MOTORS CORP.

Position the fuel level sensor to the module bucket and slide the sensor down.

Fig 2: View Of Module Wiring Clip

Courtesy of GENERAL MOTORS CORP.

Ensure that the fuel level sensor tabs (1) engage the module bucket.
Install the fuel level sensor wiring under the module clip (2).

Fig 3: View Of Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the fuel level sensor electrical connector (1) to the module cover.
Install the fuel tank module. Refer to Fuel Tank Module Replacement .