Radar Sensor Module - Long Range Scan Tool Information
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Vehicle in Run power mode, engine off. | |||
| Alignment Status | - | OK | The scan tool displays OK or Not OK. This is current alignment state of the module. |
| Long Range Radar Sensor Module Blocked | - | No | The scan tool displays Yes or No. Yes is displayed when the module has determined that it cannot effectively transmit and receive radar signals. |
| Long Range Radar Sensor Module Learn Status | - | Learned | The scan tool displays Not Learned, Learn In Progress, Learned or Error. This is the current learn state of the module. |
| Long Range Radar Sensor Module Misaligned - Angled Down | - | No | The scan tool displays Yes, or No. Yes is and indicator that the module is misaligned too low. |
| Long Range Radar Sensor Module Misaligned - Angled Left | - | No | The scan tool displays Yes, or No. Yes is and indicator that the module is misaligned too much to the left. |
| Long Range Radar Sensor Module Misaligned - Angled Right | - | No | The scan tool displays Yes, or No. Yes is and indicator that the module is misaligned too much to the right. |
| Long Range Radar Sensor Module Misaligned - Angled Up | - | No | The scan tool displays Yes, or No. Yes is and indicator that the module is misaligned too high. |
| System Power Mode | - | Run | The scan tool displays Off, Accessory, Run or Crank Request. This is the current vehicle power mode |
| System Voltage | - | 11-14 V | Current Vehicle Battery Voltage |
Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Long Range Radar Sensor Module Learn | Initializes the module learn procedure. |