Rear Differential Clutch Control Module Scan Tool Information
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Rear Differential Clutch Control Module Scan Tool Data Parameters
| Parameter | Expected Value | Description |
|---|---|---|
| Operating Conditions: Ignition is ON, engine OFF, and vehicle is stationary | ||
| Left Front Wheel Speed Sensor | 0 | The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH). |
| Left Rear Wheel Speed Sensor | 0 | The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH). |
| Rear Differential Clutch Control Module Temperature | Varies | The scan tool displays °C. The scan tool indicates a range from -40 to 215 °C. |
| Rear Differential Clutch Pump Motor Current | 0 | The scan tool displays the current in mA through the pump motor. |
| Rear Differential Clutch Solenoid Valve Current | 0 | The scan tool displays the current in mA through the rear differential clutch solenoid valve. |
| Rear Differential Clutch Status | Temporarily Disabled | The scan tool displays either Normal, Temporarily Disabled, Temporarily Limited, Malfunctioned, or Externally Disabled. |
| Rear Drive Clutch Solenoid Valve Current | 0 | The scan tool displays the current in mA through the rear drive clutch solenoid valve. |
| Rear Drive Clutch Status | Temporarily Disabled | The scan tool displays either Normal, Temporarily Disabled, Temporarily Limited, Malfunctioned, or Externally Disabled. |
| Right Front Wheel Speed Sensor | 0 | The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH). |
| Right Rear Wheel Speed Sensor | 0 | The scan tool displays 0-160 km/h (0-99.5 MPH). The scan tool displays 0 km/h (0 MPH) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 MPH). |
Rear Differential Clutch Control Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Pump Motor | This function allows the technician to command the pump motor ON and OFF. |
| Rear Differential Clutch Solenoid Valve | This function allows the technician to command the clutch solenoid valve. The system will increase or decrease the current in increments of 200 mA |
| Rear Drive Clutch Solenoid Valve | This function allows the technician to command the clutch solenoid valve. The system will increase or decrease the current in increments of 200 mA |