Memory Switch
WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the harness connector at the memory seat switch.
- Test for infinite resistance between the memory switch signal circuit terminal 1 and the switch supply voltage circuit terminal 2.
- If not infinite, replace the memory seat switch.
- Test the resistance between terminal 1 and terminal 2 while pressing the memory 1, memory 2, and EXIT buttons. Compare the resistance readings to the values in the Memory Switch Values table below.
- If the resistance is not within the specified range, replace the memory seat switch.
Memory Switch Values
| Switch Position | Resistance |
|---|---|
| Idle | Infinite |
| Memory 1 | 2.03K-2.49K Ω |
| Memory 2 | 3.83K-4.69K Ω |
| EXIT | 8.33K-10.18K Ω |