Power Mirror Replacement

Fig 1: Identifying Power Mirror

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Enclave) or Front Side Door Trim Panel Replacement - Left Side (Acadia) or Front Side Door Trim Panel Replacement - Left Side (Traverse) or Front Side Door Trim Panel Replacement - Left Side (OUTLOOK) or Front Side Door Trim Panel Replacement - Right Side (OUTLOOK) or Front Side Door Trim Panel Replacement - Right Side (Traverse) or Front Side Door Trim Panel Replacement - Right Side (Acadia) or Front Side Door Trim Panel Replacement - Right Side (Enclave) . Remove the front side door upper garnish molding. Refer to Front Side Door Garnish Molding Replacement (Enclave) .
1	Outside Rearview Mirror Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure: Disconnect the electrical connector. Tighten: 10 N.m (89 lb in)
2	Outside Rearview Mirror Procedure: Remove the retainer holding the window reveal molding at the lower corner of the door in three positions.

Callout

Component Name

Preliminary Procedures

Outside Rearview Mirror Nut (Qty: 3)

CAUTION: Refer to Fastener Caution .

Procedure:
Disconnect the electrical connector.

Tighten: 10 N.m (89 lb in)

Outside Rearview Mirror
Procedure:
Remove the retainer holding the window reveal molding at the lower corner of the door in three positions.