LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Aveo LS, 4D Hatchback, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Repair Instructions >> Shift Lock Control Solenoid Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the shift lock solenoid on the assembly.
    2. Fig 1: Locating Shift Lock Solenoid
    GM1872313Courtesy of GENERAL MOTORS CORP.
  2. Install the shift lock solenoid retaining bolts.
  3. Carefully install the shift select cover to the lever assembly.
    4. Fig 2: Shift Lever Control Knob Retaining Screws
    GM1872311Courtesy of GENERAL MOTORS CORP.
  4. Install the shift lever control knob and retaining bolts.
    5. Fig 3: Shift Control Lever Assembly & Mounting Bolts
    GM1889696Courtesy of GENERAL MOTORS CORP.
  5. Install the shift control lever assembly.
    6. CAUTION: Refer to Fastener Caution .
  6. Install the shift control lever assembly mounting bolts and tighten to 8 N.m (71 lb in).
    7. Fig 4: Control Cable Adjusting Nut
    GM1245812Courtesy of GENERAL MOTORS CORP.
  7. Connect the control cable to the shift control lever assembly.
  8. Install the control cable adjusting nut and tighten to 8 N.m (71 lb in).
    9. Fig 5: Wiring Harness Connectors & Shift Control Lever
    GM1245816Courtesy of GENERAL MOTORS CORP.
  9. Connect the harness connector.
  10. Adjust the control cable. Refer to Range Selector Lever Cable Adjustment .
  11. Install the floor console. Refer to Front Floor Console Replacement (Notchback) .
  12. Connect the negative battery cable.
scientia non olet · About LEMON Manuals