Setup For Component Replacement
WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
- If any of the following components are replaced, an idle learn procedure must be performed. Refer to the procedure:
- Throttle body assembly
- ECM
- If any of the following components are replaced, a CKP variation learn procedure must be performed. Refer to the appropriate procedure:
- CKP sensor
- Engine replacement
- Any engine repair that disturbs the relationship between CKP sensor and the crankshaft reluctor wheel.