LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Programming And Setup - All Systems) >> Repair Instructions >> Head-Up Display Programming and Setup >> Head-Up Display Programming (ZL1 only)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Head-Up Display Programming (ZL1 only)

WARNING: This page is about a different car, the 2012 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

To program and setup an existing or new replacement Head-Up Display, perform the following procedure:

  1. With a scan tool, access the Service Programming System (SPS) and follow the on-screen instructions. Refer to Service Programming System (SPS) .
  2. On the SPS Supported Controllers screen, select Head-Up Display - Programming and follow the on-screen instructions.

If the Head-Up Display fails to accept the program, verify all scan tool and Head-Up Display connections are secure.

NOTE:

After programming is completed, perform the following to avoid future misdiagnosis:

  1. Turn the ignition OFF for 10 seconds.
  2. Open and close the door.
  3. Connect the scan tool to the data link connector.
  4. Ignition ON, engine OFF.
  5. With a scan tool, clear all DTC's from all modules.
scientia non olet · About LEMON Manuals