Fuel Pump Flow Control Module Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Pump Flow Control Module And Fastener

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the right side quarter trim panel. Refer to Quarter Trim Panel Replacement (Coupe) , Quarter Trim Panel Replacement (Convertible) .
1	Fuel Pump Flow Control Module Fastener CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Fuel Pump Flow Control Module Procedure Disconnect the electrical connector. If replacing, reprogram the module. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the right side quarter trim panel. Refer to Quarter Trim Panel Replacement (Coupe) , Quarter Trim Panel Replacement (Convertible) .

Fuel Pump Flow Control Module Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
3 N.m (27 lb in)

Fuel Pump Flow Control Module

Procedure

Disconnect the electrical connector.
If replacing, reprogram the module. Refer to Control Module References .