Rear Object Alarm Control Module Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Object Alarm Module And Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear end trim panel. Refer to Rear End Trim Finish Panel Replacement (Coupe) , Rear End Trim Finish Panel Replacement (Convertible) .
1	Rear Object Alarm Module Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 6 N.m (53 lb in)
2	Rear Object Alarm Module Procedure Disconnect electrical connector. Reprogram the rear object alarm module after replacement. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the rear end trim panel. Refer to Rear End Trim Finish Panel Replacement (Coupe) , Rear End Trim Finish Panel Replacement (Convertible) .

Rear Object Alarm Module Nut (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
6 N.m (53 lb in)

Rear Object Alarm Module

Procedure

Disconnect electrical connector.
Reprogram the rear object alarm module after replacement. Refer to Control Module References .