Removal Procedure
- Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (Primary) , Battery Negative Cable Disconnection and Connection (Auxiliary) .
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
- Disconnect the theft deterrent module (TDM) electrical connector (4).
- Detach the ignition lock cylinder lamp socket (2) from the TDM (1).
- Remove the TDM to steering column assembly retaining screw (3).
- Remove the TDM (1) from the steering column assembly (2).
WARNING:
Refer to SIR Warning .
IMPORTANT:
Rotate the ignition lock cylinder lamp socket counter-clockwise to disengage the locking tangs and pull to detach the ignition lock cylinder lamp socket (2) from the TDM.