Passenger Presence System Rezeroing: Introduction
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
The inflatable restraints passenger presence system is a calibrated system that requires rezeroing anytime the seat cushion trim attachments have been removed or the passenger presence system has been replaced. The procedures below are designed to assist in the rezeroing of the passenger presence system. Before you start, read these procedures carefully and completely. For further information regarding the passenger presence system refer to SIR System Description and Operation .
IMPORTANT:
The following procedures must be followed:
- Read this procedure carefully and completely.
- The passenger presence system will not function properly if the passenger presence system rezeroing procedure is not performed.
- Perform the Diagnostic System Check - Vehicle after successfully completing the rezeroing procedure to ensure the system is functioning properly.