Circuit/System Testing
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X3 harness connector at the T3 audio amplifier.
- Connect a test lamp between the control circuit terminal 11 and ground.
- Ignition ON, radio ON, turn the mute button on the A11 radio ON and OFF. The test lamp should turn ON and OFF when changing between the commanded states.
- If the test lamp is always ON, test the control circuit for a short to voltage. If the circuit tests normal, replace the A11 radio.
- If the test lamp is always OFF, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the A11 radio.
- If all circuits test normal, replace the T3 audio amplifier.