Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Conditioning (A/C) Condenser Bolt | 6.5 N.m | 58 lb in |
| Air Conditioning (A/C) Line Clip to Fan Shroud Screw | 1 N.m | 9 lb in |
| Auxiliary Cooling Fan Bolt | 6.5 N.m | 58 lb in |
| Brake Master Cylinder Nut | 25 N.m | 18 lb ft |
| Clutch Master Cylinder Bolt | 50 N.m | 37 lb ft |
| Coolant Air Bleed Pipe Cover Bolt (LSA) | 12 N.m | 106 lb in |
| Coolant Air Bleed Stud (LSA) | 12 N.m | 106 lb in |
| Coolant Pipe to Cylinder Head Bolt (LLT) | 50 N.m | 37 lb ft |
| Coolant Pipe to Generator Bracket Bolt (LLT) | 10 N.m | 89 lb in |
| Coolant Pipe to Thermostat Housing Bolt (LLT) | 10 N.m | 89 lb in |
| Electric Cooling Fan Blade Nut | 7 N.m | 62 lb ft |
| Coolant Recovery Reservior Bolt | 17 N.m | 13 lb in |
| Electric Cooling Fan Motor Screw | 5 N.m | 44 lb in |
| Electric Cooling Fan Resistor Bolt | 5.4 N.m | 48 lb in |
| Electric Cooling Fan Shroud to Plenum Bolt | 6.5 N.m | 58 lb in |
| Electric Cooling Fan Shroud to Radiator Bolt | 6.5 N.m | 58 lb in |
| Engine Coolant Heater (LSA) | 50 N.m | 37 lb ft |
| Engine Coolant Heater Cord Fastener (LSA) | 10 N.m | 89 lb in |
| Engine Coolant Heater Ground Wire Bolt (LLT) | 12 N.m | 106 lb in |
| Oil Level Indicator Tube Bolt | 20 N.m | 15 lb ft |
| Radiator Support Bracket Bolt | 9 N.m | 80 lb in |
| Thermostat Bolt (LLT) | 10 N.m | 89 lb in |
| Thermostat Housing Bolt (LLT) | 20 N.m | 15 lb ft |
| Thermostat Housing Bolt (LSA) | 15 N.m | 11 lb ft |
| Water Outlet Housing Bolt (LLT) | 10 N.m | 89 lb in |
| Water Pump Bolt (LLT) | 10 N.m | 89 lb in |
| Water Pump Bolt (LSA) | 30 N.m | 22 lb ft |
| Water Pump Pulley Bolt (LLT) | 12 N.m | 106 lb in |