LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Chevy Express G1500, Van Cargo, 4.3 X >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.3L - Repair Instructions >> Repair Instructions >> Engine Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: ECM Bracket Tabs And Bracket
    GM1932024Courtesy of GENERAL MOTORS CORP.
  1. Install the ECM (4) to the bracket (2).
  2. Ensure that the ECM bracket tabs (3) fully engage the ECM.
    3. Fig 2: Engine Wiring Harness Electrical Connectors
    GM1932023Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connectors (2) to the ECM (1).
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  5. If a new ECM was installed, program the ECM. Refer to Control Module References .
  6. Using a scan tool, set the remaining engine oil life.
scientia non olet · About LEMON Manuals