LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Chevy Express G1500, Van Cargo, 4.3 X >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.3L - Repair Instructions >> Repair Instructions >> Knock Sensor 2 Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Engine Wiring Harness And Components
    GM1877018Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Reposition the knock sensor sleeve (2) down, away from the knock sensor.
  3. Disconnect the engine wiring harness electrical connector from the knock sensor (1).
    4. Fig 2: Knock Sensor And Bolt
    GM1877020Courtesy of GENERAL MOTORS CORP.
  4. Remove the knock sensor bolt and sensor.
scientia non olet · About LEMON Manuals