LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Cruze LT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LUJ) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Open hood.
    2. Fig 1: Camshaft Position Sensor Wiring Harness Plug
    GM2191800Courtesy of GENERAL MOTORS CORP.
    NOTE: Graphic shows exhaust camshaft position sensor. Use same procedure for Intake camshaft position sensor.
  2. Disconnect the camshaft position sensor wiring harness plug (1).
    3. Fig 2: Camshaft Position Sensor
    GM2191799Courtesy of GENERAL MOTORS CORP.
    NOTE: Graphic shows exhaust camshaft position sensor. Use same procedure for Intake camshaft position sensor.
  3. Remove the camshaft position sensor bolt (3).
  4. Remove the camshaft position sensor (2) and the seal ring (1).
scientia non olet · About LEMON Manuals