LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> HHR LS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.2L Or 2.4L - Repair Instructions >> Repair Instructions >> Fuel Line Replacement - Chassis >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027) , Fuel Pressure Relief (CH 48027) .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    3. Fig 1: Evaporative Emission (EVAP) Line, Fuel Feed Line And Purge Solenoid
    GM2442951Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the fuel feed line (2) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
  4. Cap or plug the fuel line and the engine fuel rail to prevent contamination.
  5. Disconnect the evaporative emission (EVAP) line (1) from the purge solenoid (3). Refer to Plastic Collar Quick Connect Fitting Service .
  6. Cap or plug the EVAP line in order to prevent contamination.
  7. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    8. Fig 2: Fuel Feed Line And EVAP Line
    GM2443002Courtesy of GENERAL MOTORS COMPANY
  8. Disconnect the fuel feed line (1) and EVAP line (2) quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service .
    9. Fig 3: Fuel/EVAP/Brake Line Shield
    GM2442999Courtesy of GENERAL MOTORS COMPANY
  9. Remove the fuel/EVAP/brake line shield (1).
    10. Fig 4: EVAP Lines, Brake Lines And Brackets
    GM2443001Courtesy of GENERAL MOTORS COMPANY
  10. Remove the brake lines (2) from the fuel/EVAP/brake line brackets.
  11. Open the line brackets (1) and remove the fuel and EVAP lines (3) from the brackets.
  12. Remove the fuel and EVAP lines from the vehicle.
scientia non olet · About LEMON Manuals