Without Scan Tool
WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
- With a new, unlearned, vehicle key, turn ON the ignition, with the engine OFF.
- Observe the security indicator. After approximately 10 minutes, the telltale will turn OFF.
- Turn OFF the ignition, and wait 5 seconds.
- Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
- Start the vehicle. The ECM has learned the fuel continue password.
- If additional keys are required to be learned, refer to Adding Keys .
IMPORTANT:
The engine controller learns the fuel continue password on the ignition switch transition from OFF to RUN. You must turn the ignition OFF before attempting to start the vehicle.