Installation Procedure
WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
- Position the electronic power steering motor control module and bracket (2) together.
- Install the electronic power steering motor control module bolts (1).
Tighten: Tighten the bolts to 11.5 N.m (102 lb in).
- Install the electronic power steering motor control module and bracket to the vehicle.
- Install the electronic power steering motor control module bracket bolts (1).
Tighten: Tighten the bolts to 11.5 N.m (102 lb in).
- Connect the electronic power steering motor control module electrical connectors.
CAUTION:
Refer to Fastener Caution
.