Removal Procedure

WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.

Position the steering column in the most upwards position possible.
Disconnect the electronic power steering motor control module electrical connectors.

Fig 1: Identifying Electronic Power Steering Motor Control Module Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the electronic power steering motor control module bracket bolts (1).
Remove the electronic power steering motor control module and bracket together from the vehicle.

Fig 2: Identifying Electronic Power Steering Motor Control Module Bracket & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the electronic power steering motor control module bolts (1).
Separate the electronic power steering motor control module and bracket (2).