Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the automatic transaxle control assembly. Refer to Transmission Control Replacement
for the MH8 transmission or Transmission Control Replacement
for the MH2 transmission.
- Disconnect the Shift Lock Control Solenoid connector from the solenoid.
Courtesy of GENERAL MOTORS CORP.
- Using a flat-blade screwdriver or similar tool pry the solenoid off of the ball-sockets on the solenoid plunger and solenoid body.
Courtesy of GENERAL MOTORS CORP.
- Remove the shift lock control solenoid.