LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Mass Airflow Sensor with Intake Air Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Mass Airflow Sensor/Intake Air Temperature Sensor
    GM1858081Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF/IAT sensor seal (3) onto the MAF/IAT sensor.
  2. Install the MAF/IAT sensor (2) to the air cleaner assembly.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the MAF/IAT sensor screws (1).

    Tighten 

    Tighten the screws to 4 N.m (35 lb in).

  4. Connect the engine wiring harness electrical connector (4) to the MAF/IAT sensor.
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
scientia non olet · About LEMON Manuals