Installation Procedure
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front side door lock cover (5) to cover the lock.
- Install the screws (4) to the outer edge of the door and to the inside and tighten to 5 N.m (44 lb in).
- Install the screw cover (3).
- Connect the electrical connector (2).
- Install the wiring harness to the retainers (1).
- Inspect the door locking system for proper operation before installing the trim panel.
- Install the front side door water deflector.
- Install the front side door trim panel. Refer to Front Side Door Trim Replacement .
CAUTION:
Refer to Fastener Caution .