Circuit/System Testing
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X1 harness connector at the K68 trailer lighting control module.
- Test for infinite resistance between the control circuit terminal 7 and ground.
- If less than the specified value, test the control circuit for a short to ground. If the circuit tests normal, replace the X88 trailer connector.
- Test for less than 1 Ω between the control circuit terminal 7 at the K68 trailer lighting control module and control circuit terminal 8 at the X88 trailer connector.
- If greater than the specified range, test the control circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the X88 trailer connector.
- If all the circuits test normal, replace the K68 trailer lighting control module.