Hybrid Powertrain Control Module 2 Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hybrid Powertrain Control Module 2

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the passenger front seat. Refer to Driver or Passenger Seat Replacement .
1	Hybrid Powertrain Control Module 2 Procedure Reposition carpet access flap. Disconnect the electrical connections. Using the appropriate tool, gently disengage the module from the four retaining tabs on bracket. For programming and set up procedures, refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the passenger front seat. Refer to Driver or Passenger Seat Replacement .

Hybrid Powertrain Control Module 2

Procedure

Reposition carpet access flap.
Disconnect the electrical connections.
Using the appropriate tool, gently disengage the module from the four retaining tabs on bracket.
For programming and set up procedures, refer to Control Module References .