LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Camaro LS, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Head-Up Display Programming and Setup >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Head-Up Display Programming and Setup: Notes

The Head-Up Display (without ZL1) requires no programming or setup.

The Head-Up Display (with ZL1) must be programmed with the proper calibration software. The module stores and utilizes this information however if it is not properly configured with the correct calibration software, the Head-Up Display will not function properly.

Ensure that the following conditions exist in order to prepare for Head-Up Display programming:

  1. The battery is fully charged.
  2. The MDI data link connectors are secure.
  3. The scan tool is loaded with the most current software version.
  4. All disconnected modules and devices are reconnected securely.
  5. This entire procedure has been reviewed before proceeding.

Do not reprogram the Head-Up Display unless directed by a service procedure or a service bulletin.

scientia non olet · About LEMON Manuals