LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Captiva Sport LS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement - Secondary >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

  1. Remove the fuel tank. Refer to Fuel Tank Replacement (FWD) , Fuel Tank Replacement (AWD) .
    2. Fig 1: Electrical Connector & Evaporative Emission Line
    GM2239771Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector (1).
  3. Disconnect the evaporative emission line (2). Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: Cam Lock Ring
    GM2239774Courtesy of GENERAL MOTORS COMPANY
  4. Using the CH-48482  wrench , remove the cam lock ring (1) by turning counterclockwise.
    5. Fig 3: Crossover Tube & Plastic Retaining Tabs
    GM2239779Courtesy of GENERAL MOTORS COMPANY
  5. Partially raise the secondary fuel pump module and disconnect the crossover tube (1) by squeezing the plastic retaining tabs (2).
    6. Fig 4: Secondary Fuel Tank Module & O-Ring
    GM2239781Courtesy of GENERAL MOTORS COMPANY
  6. Remove the secondary fuel tank module (1) and the O-ring (2).
scientia non olet · About LEMON Manuals