Installation Procedure
- Inspect each spark plug gap. Adjust each plug as needed.
Specification
Spark plug gap: 1.01 mm (0.040 in)
- Hand start the spark plugs in the corresponding cylinders.
- Tighten the spark plugs for used heads to 15 N.m (11 lb ft). Tighten the spark plugs for new aluminum heads to 20 N.m (15 lb ft). Tighten the spark plugs for new iron heads to 30 N.m (22 lb ft).
- Install the spark plug wires. Refer to Spark Plug Wire Replacement .
CAUTION:
Refer to Fastener Caution .