Communication Interface Module Bracket Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 GMC Savana Special, 2011 GMC Savana Camper Special, 2011 GMC Savana, 2011 Chevrolet RV Cutaway, and 2011 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Communication Interface Module Bracket

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .
1	Communication Interface Module Bracket Bolt (Qty: 3) CAUTION: Refer to Fastener Caution .
2	Communication Interface Module Bracket Procedure Disconnect the electrical connections. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure
Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .

Communication Interface Module Bracket Bolt (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Communication Interface Module Bracket

Procedure

Disconnect the electrical connections.
Transfer components as necessary.