Communication Interface Module Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 GMC Savana Special, 2011 GMC Savana Camper Special, 2011 GMC Savana, 2011 Chevrolet RV Cutaway, and 2011 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Communication Interface Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .
1	Communication Interface Module Procedure Unsnap module from bracket. Disconnect the electrical connections. If replacing the communication interface module be sure to transfer bluetooth antenna, if equipped. For programming and set up procedures, refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .

Communication Interface Module

Procedure

Unsnap module from bracket.
Disconnect the electrical connections.
If replacing the communication interface module be sure to transfer bluetooth antenna, if equipped.
For programming and set up procedures, refer to Control Module References .