Circuit/System Verification (Object Detection System - Park Assist System)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, engine running, transmission in R.
- Verify the scan tool Park Assist Sensor Reference Voltage parameter is between 7.2-9.2 V.
- If Park Assist Sensor Reference Voltage is not between 7.2-9.2 V
Refer to Circuit/System Testing below
- If Park Assist Sensor Reference Voltage is between 7.2-9.2 V
- If Park Assist Sensor Reference Voltage is not between 7.2-9.2 V
- All OK.