LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Data Communication System) >> Diagnostic Information and Procedures >> Scan Tool Does Not Power Up >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, test for battery voltage between the battery positive voltage circuit of the DLC and ground.
    • If less than battery voltage, repair the voltage supply circuit for a short to ground or an open/high resistance.
  2. Test for less than 1 ohm of resistance between the ground circuit of the DLC and ground.
    • If greater than 1 ohm, repair the ground circuit for an open/high resistance.
  3. If all tests normal, refer to the scan tool/CANdi module user guide.
scientia non olet · About LEMON Manuals