LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Wiring Harness Supply, Front Compartment Fuse Block And Electrical Connectors
    GM2191907Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install front compartment fuse block wiring harness supply (1) and tighten to 12 N.m (106 lb in).
  2. Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).
    3. Fig 2: Front Compartment Fuse Block Bolt
    GM2191908Courtesy of GENERAL MOTORS COMPANY
  3. Install 3 front compartment fuse block bolts (1) and tighten to 6 N.m (53 lb in).
  4. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
  5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals