Setup for Component Replacement
WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, use a scan tool to perform the appropriate learn function.
Clutch pedal position sensor
To speed up the learn process perform the scan tool Fuel Trim Reset function if any of the following components are replaced:
- Manifold absolute pressure sensor
- Accelerator pedal position sensor
- Throttle body
- Heated oxygen sensor
- Fuel injector
- Crankshaft position sensor
- Camshaft position sensor