LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Programming And Setup - All Systems) >> Repair Instructions >> Power Steering Control Module Programming and Setup >> Power Steering Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Control Module Replacement

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

If the power steering control module needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Electronic Power Steering - Prepare Control Module for Removal and follow the on-screen instructions.
  3. Perform the SPS function Electronic Power Steering - Programming and follow the on-screen instructions.
  4. Perform the SPS function Electronic Power Steering - Setup and follow the on-screen instructions.
  5. Perform the steering angle sensor centering and software endstop learn procedure. Refer to Power Steering Control Module Calibration
  6. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals