Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wheel Speed Sensor Wiring Harness

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor (1) to the vehicle.
Connect the electrical connector.
Install the wiring harness retainers to the frame.

Fig 2: Wheel Speed Sensor And Wheel Speed Sensor Screw

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor (1) to the steering knuckle.

CAUTION: Refer to Fastener Caution .

Install the wheel speed sensor screw (2) and tighten to 9 N.m (80 lb in).
Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .