Installation Procedure
- Install the generator (2) with the mounting fasteners (1) and tighten to 35 N.m (26 lb ft).
- Install the battery positive cable (3) and the engine harness connector (1) to the back of the generator. Tighten fastener (2) to 9 N.m (80 lb in).
- Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
- Install the drive belt. Refer to Drive Belt Replacement .
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .