Circuit/System Verification
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, verify the park assist system is enabled through the DIC.
- If the park assist system is manually disabled, enable the system. Refer to the vehicle owners manual for instructions on enabling the system.
- Transmission in REVERSE, verify one audible beep sounds and the scan tool Park Assist System Status parameter is Enable.
- If not the specified values, refer to Diagnostic Aids and the scan tool Park Assist Disable History parameters to determine the cause of the inhibit.
NOTE:
After completing the next step the vehicle might need to be driven at speed greater than 40 km/h (25 mph).