LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> DTC B0081 (Passenger Presence Detection Module) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This system is serviced as a kit (seat foam, module and sensing mat). Perform a Passenger Presence System Preload procedure whenever a component is replaced. Refer to Passenger Presence System Preload Test .
  • Both SDM and passenger presence module set DTC B0081 but with different symptoms bytes. Therefore it is important to identify which module has set the DTC B0081. Use the symptom bytes as a way of identify the correct module to diagnose.
  • The SDM sets a B0081 3A when an incorrect passenger presence module is installed.
  1. Verify that DTC B0081 3A is not set in the SDM.
    • If DTC B0081 3A is set in the SDM, replace the K85 passenger presence module.
    2. NOTE: The SDM sets a redundant B0081 00 DTC when the passenger presence module sets a DTC B0081 11 or B0081 4B.
  2. Verify that DTC B0081 11 or DTC B0081 4B is not set in the passenger presence module.
scientia non olet · About LEMON Manuals