Setup for Component Replacement
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, the corresponding procedure must be performed.
Steering Angle Sensor
Calibrate the steering angle sensor. Refer to Steering Angle Sensor Centering
Multi-Axis Acceleration Sensor
Calibrate the multi-axis acceleration sensor. Refer to Vehicle Yaw Sensor Learn
Brake Pressure Modulator Valve Assembly
Calibrate the brake pressure sensor. Refer to Brake Pressure Modulator Valve Pressure Sensor Calibration