LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Programming And Setup - All Systems) >> Repair Instructions >> Liftgate Control Module Programming and Setup >> Liftgate Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Control Module Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

If the liftgate control module is replaced, the following procedures must be performed.

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Liftgate Control Module - Programming and follow the on-screen instructions.
  3. Perform the SPS function Liftgate Control Module - Configuration & Setup and follow the on-screen instructions. On the screen Control Module - Configuration & Setup Function(s), select both ECU Configuration/Reconfiguration and the appropriate ECU Setup.
  4. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals