Installation Procedure
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Install the negative battery cable clamp onto the battery negative post (2) and tighten the nut (1) to 9 (80 lb in).
- Install the battery cover and tighten the fastener to 1.6 (14 lb in).
- Install the rear seat front trim covers.
- Reset all of the customers radio station presets.
- Install the middle row floor matt, if equipped.
CAUTION:
Refer to Fastener Caution .