Circuit/System Testing
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connectors at both of the P22 seatback video displays.
- Ignition ON, DVD playing, test for 190-210 HZ DC between the video brightness control circuit terminal 16 and ground at each of the P22 seatback video displays.
- If not within the specified range, test the control circuit for a short to voltage, short to ground, or an open/high resistance. If the circuit tests normal, replace the radio.
- Ignition OFF, reconnect the harness connector at the P22E driver seatback video display.
- Ignition ON, DVD playing, test for 190-210 HZ DC between the video brightness control circuit terminal 16 and ground at the P22F passenger seatback video display.
- If not within the specified range, replace the P22E driver seatback video display.
- If all circuits test normal, replace the P22F passenger seatback video display.