Circuit/System Testing
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Apply and release brake pedal. Verify brake lamps operate properly.
- If brake lamps do not operate properly, refer to Symptoms - Lighting .
- Perform the scan tool electronic brake control module Brake Pressure Sensor Calibration. Refer to Brake Pressure Modulator Valve Pressure Sensor Calibration .
- Replace the brake pressure modulator valve.