LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Power Seat System) >> Repair Instructions >> Driver Seat Adjuster Switch Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver Seat Adjuster Switch Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Seat Adjuster Switch
GM1828453Courtesy of GENERAL MOTORS COMPANY
Driver Seat Adjuster Switch Replacement

Callout Component Name
1 Driver Seat Adjuster Switch Mounting Plate

Procedure

  1. Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate.
  2. Disconnect the electrical connectors from the switch assemblies.
2 Driver Seat Recliner Knob
Procedure 
Use a flat-bladed tool to release the knob from the mounting plate.
3 Driver Seat Adjuster Knob
Procedure 
Use a flat-bladed tool to release the knob from the mounting plate.
4 Driver Seat Adjuster and Recliner Switch
Procedure 
Use a flat-bladed tool to release the switch from the mounting plate.